Prompt Motion
@AiMotionSiteS
Prompt library

3D scenes

Realistic 3D Chevrolet Camaro model built from a blueprint

Realistic 3D Chevrolet Camaro model built from a blueprint is a 21.4-second Claude Opus motion design reference by @maxt3chno, built around code. [Note: the creator shared a partial prompt. Copy this 3D motion prompt, keep the creator's frame counts and palette, and adapt the subject for your own launch film.

@maxt3chnoView post

Prompt

[Note: the creator shared a partial prompt. Wording below is theirs.] GOAL: # Task: model a 2010 Chevrolet Camaro in Blender from a blueprint Work folder: `<FOLDER>` Work only inside this folder (blend files, scripts, textures, renders). MOTION: You are working in a live Blender session through the Blender MCP tools. Build a realistic 3D model of a 2010 Chevrolet Camaro RS coupe, finished in yellow with black stripes. Before anything else, confirm the Blender connection works and check `https://t.co/fdimPQS8xI.version`. Earlier attempts at this kind of brief failed in the same few ways, and this prompt is built around avoiding them: - Bodies shaped by eye matched the outer silhouette but had wrong widths inside it: cabin too wide or narrow, shoulders in the wrong place. - Bodies generated from pixel measurements or fitted by a solver came out lumpy or as a soft blanket with no creases. - Details pushed into the body mesh came out as shallow, soft dents that read as decals. - Windows split along mesh faces had stepped, ragged edges. ## References - `refs\blueprint.jpg` (also attached): four orthographic views. Top row: front view on the left, rear view on the right. Middle: top view, nose pointing left. Bottom: side view, nose pointing right. The top and side views face opposite ways. - Gray studio photos (attached): only for understanding the 3D form, such as how full the fenders are, which edges are sharp, how the roof meets the pillars. Take no dimensions from them. - Yellow photos (attached): the target look for paint, stripes, wheels, lamps and trim. Take no proportions from them. The blueprint is the source of truth for proportions. The one number you get from me is the wheelbase: 2.852 m. My descriptions below tell you what to look for; the references show what it looks like. If a reference and anything written here disagree, follow the reference and tell me. Never split the difference. ## Method for all shape work - Feature lines first: trace each important edge as a 3D curve with few control points, matched to the blueprint in two views at once. - Those curves become real edge loops of a coarse subdivision cage, with vertices placed on them by hand. Fill the panels between neighbouring lines with at most one or two rows. Different panels may have different densities. - Keep feature lines sharp with creases or tight support loops, and the surface smooth in between. Smoothness comes from having few control points. - No solver, no optimiser, no fairing or smoothing passes, and no geometry generated from pixel data or masks. Correct shapes by moving existing points. - Every edge the eye follows (window outlines, openings, panel gaps) comes from a smooth curve. Openings are cut with a closed curve as the cutter, never by pushing cage points in or by selecting faces. - Use code for calibration and checking only. - For every comparison, render with orthographic cameras; viewport screenshots can come back stale. ## Stage 1: set up the blueprint Work in meters, car centered on the origin, tires on Z=0. Split the b
Author original
# Task: model a 2010 Chevrolet Camaro in Blender from a blueprint Work folder: `<FOLDER>` Work only inside this folder (blend files, scripts, textures, renders). You are working in a live Blender session through the Blender MCP tools. Build a realistic 3D model of a 2010 Chevrolet Camaro RS coupe, finished in yellow with black stripes. Before anything else, confirm the Blender connection works and check `https://t.co/fdimPQS8xI.version`. Earlier attempts at this kind of brief failed in the same few ways, and this prompt is built around avoiding them: - Bodies shaped by eye matched the outer silhouette but had wrong widths inside it: cabin too wide or narrow, shoulders in the wrong place. - Bodies generated from pixel measurements or fitted by a solver came out lumpy or as a soft blanket with no creases. - Details pushed into the body mesh came out as shallow, soft dents that read as decals. - Windows split along mesh faces had stepped, ragged edges. ## References - `refs\blueprint.jpg` (also attached): four orthographic views. Top row: front view on the left, rear view on the right. Middle: top view, nose pointing left. Bottom: side view, nose pointing right. The top and side views face opposite ways. - Gray studio photos (attached): only for understanding the 3D form, such as how full the fenders are, which edges are sharp, how the roof meets the pillars. Take no dimensions from them. - Yellow photos (attached): the target look for paint, stripes, wheels, lamps and trim. Take no proportions from them. The blueprint is the source of truth for proportions. The one number you get from me is the wheelbase: 2.852 m. My descriptions below tell you what to look for; the references show what it looks like. If a reference and anything written here disagree, follow the reference and tell me. Never split the difference. ## Method for all shape work - Feature lines first: trace each important edge as a 3D curve with few control points, matched to the blueprint in two views at once. - Those curves become real edge loops of a coarse subdivision cage, with vertices placed on them by hand. Fill the panels between neighbouring lines with at most one or two rows. Different panels may have different densities. - Keep feature lines sharp with creases or tight support loops, and the surface smooth in between. Smoothness comes from having few control points. - No solver, no optimiser, no fairing or smoothing passes, and no geometry generated from pixel data or masks. Correct shapes by moving existing points. - Every edge the eye follows (window outlines, openings, panel gaps) comes from a smooth curve. Openings are cut with a closed curve as the cutter, never by pushing cage points in or by selecting faces. - Use code for calibration and checking only. - For every comparison, render with orthographic cameras; viewport screenshots can come back stale. ## Stage 1: set up the blueprint Work in meters, car centered on the origin, tires on Z=0. Split the b

Questions

What is this 3d scenes prompt for?

It is a Claude Opus motion design brief for “Realistic 3D Chevrolet Camaro model built from a blueprint”. Paste it into Claude and keep the timings already written in the prompt.

Where is the original film?

The creator is @maxt3chno. Use View post to open the X video this prompt belongs to.

More 3d scenes prompts