Interactive jelly shark real-time soft-body webpage with controls
Interactive jelly shark real-time soft-body webpage with controls is a 17-second Claude Opus motion design reference by @vib3coded, built around Three.js. [Note: the creator shared a partial prompt. Copy this UI motion prompt, keep the creator's frame counts and palette, and adapt the subject for your own launch film.
@vib3codedView post
Prompt
[Note: the creator shared a partial prompt. Wording below is theirs.]
GOAL:
Build a single-file web page called "Great White Jelly" (Material Studies No.
MOTION:
060, three.js r170 via an import map from jsdelivr; everything else hand-written). A big, stout great white shark cast in clear jelly lies on its belly on a pale table, with a milky belly showing through, jaws slightly open on rows of sugar teeth. It is a real-time soft body you can poke, drag, twist and feed. Calm editorial page: a big italic serif title top left with a short caption, a control panel on the right, and readouts and a "handle" note bottom left. The shark is framed large, in a three-quarter view from the front, kept clear of the panel.
GEOMETRY
Build the shark from one signed distance field, in a rest frame with y up and the body lying on the table at y = 0, then build a simulation lattice and render surfaces from it.
Body:
- A superellipse section swept along a gentle Catmull–Rom spine on the table, from the tail stock to the snout, with a straight head at the front.
- Proportions like a real great white: a stout torpedo, deepest under the first dorsal fin, tapering to a slim tail stock and lifted at the tail so the crescent tail stands on its lower lobe.
- A long wedge forward from the dorsal fin to the snout. The top line descends smoothly in an almost straight line with no step or hump behind the head. The belly is pressed slightly flat into the table.
Head:
- A bluntly conical snout with a rounded tip.
- Toward the snout the section's widest line sinks, giving a domed top over a flatter underside.
- The snout overhangs a short lower jaw. The lower jaw ends in a U seen from above and has a rounded chin seen from the side.
- The mouth line runs from the corner of the mouth (the hinge, a little behind the eye) forward under the snout.
- Small round black eyes sit high on the sides, ahead of the mouth corner.
- Five long gill slits sit behind the head.
The open mouth:
- Built open about 20°: the snout and upper jaw are lifted only slightly (about 6°), staying in line with the back, and the lower jaw is dropped onto the table. The head is raised just enough that the dropped jaw rests on the table instead of hanging.
- Map points between the open and closed head by rotating each half about the hinge, with the swing spread smoothly across the corner of the mouth.
- Hollow the mouth: a dished floor inside the lower jaw's rim and a palate above, so the teeth stand on the rims.
Fins:
- Median fins as Catmull–Rom outlines extruded across the body: a tall first dorsal with a concave trailing edge, a small second dorsal, an anal fin, and a crescent tail.
- Paired fins in planes of their own: long falcate pectorals splayed down onto the table, and pelvics.
Inside:
- A milky layer just under the skin fills the belly up to a ragged countershading line high on the flank.
- On the head, the white runs from the corner of the mouth, under the eye, to the tip of the snout, so the snout's underside and the whole lower jaw are white and the top of the head is
Author original
Build a single-file web page called "Great White Jelly" (Material Studies No. 060, three.js r170 via an import map from jsdelivr; everything else hand-written). A big, stout great white shark cast in clear jelly lies on its belly on a pale table, with a milky belly showing through, jaws slightly open on rows of sugar teeth. It is a real-time soft body you can poke, drag, twist and feed. Calm editorial page: a big italic serif title top left with a short caption, a control panel on the right, and readouts and a "handle" note bottom left. The shark is framed large, in a three-quarter view from the front, kept clear of the panel.
GEOMETRY
Build the shark from one signed distance field, in a rest frame with y up and the body lying on the table at y = 0, then build a simulation lattice and render surfaces from it.
Body:
- A superellipse section swept along a gentle Catmull–Rom spine on the table, from the tail stock to the snout, with a straight head at the front.
- Proportions like a real great white: a stout torpedo, deepest under the first dorsal fin, tapering to a slim tail stock and lifted at the tail so the crescent tail stands on its lower lobe.
- A long wedge forward from the dorsal fin to the snout. The top line descends smoothly in an almost straight line with no step or hump behind the head. The belly is pressed slightly flat into the table.
Head:
- A bluntly conical snout with a rounded tip.
- Toward the snout the section's widest line sinks, giving a domed top over a flatter underside.
- The snout overhangs a short lower jaw. The lower jaw ends in a U seen from above and has a rounded chin seen from the side.
- The mouth line runs from the corner of the mouth (the hinge, a little behind the eye) forward under the snout.
- Small round black eyes sit high on the sides, ahead of the mouth corner.
- Five long gill slits sit behind the head.
The open mouth:
- Built open about 20°: the snout and upper jaw are lifted only slightly (about 6°), staying in line with the back, and the lower jaw is dropped onto the table. The head is raised just enough that the dropped jaw rests on the table instead of hanging.
- Map points between the open and closed head by rotating each half about the hinge, with the swing spread smoothly across the corner of the mouth.
- Hollow the mouth: a dished floor inside the lower jaw's rim and a palate above, so the teeth stand on the rims.
Fins:
- Median fins as Catmull–Rom outlines extruded across the body: a tall first dorsal with a concave trailing edge, a small second dorsal, an anal fin, and a crescent tail.
- Paired fins in planes of their own: long falcate pectorals splayed down onto the table, and pelvics.
Inside:
- A milky layer just under the skin fills the belly up to a ragged countershading line high on the flank.
- On the head, the white runs from the corner of the mouth, under the eye, to the tip of the snout, so the snout's underside and the whole lower jaw are white and the top of the head is
Questions
What is this ui motion prompt for?
It is a Claude Opus motion design brief for “Interactive jelly shark real-time soft-body webpage with controls”. Paste it into Claude and keep the timings already written in the prompt.
Where is the original film?
The creator is @vib3coded. Use View post to open the X video this prompt belongs to.